Finishing Menu - Lexmark 7527-415 CX410e User Manual

Understanding the printer menus
Use
Resource Save
On
Off
Print All Order
Alphabetical
Oldest First
Newest First

Finishing menu

Use
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Copies
1–999
Blank Pages
Do Not Print
Print
Collate
(1,1,1) (2,2,2)
(1,2,3) (1,2,3)
To
Specify how the printer handles temporary downloads, such as fonts and macros
stored in the RAM, when the printer receives a job that requires more memory than
is available.
Notes:
•
Off is the factory default setting. This sets the printer to retain the downloads
only until memory is needed. Downloads are deleted in order to process print
jobs.
• On retains the downloads during language changes and printer resets. If the
printer runs out of memory, then Memory Full [38] appears, and
downloads are not deleted.
Specify the order in which held and confidential jobs are printed when Print All is
selected.
Note: Alphabetical is the factory default setting. Print jobs always appear in
alphabetical order on the printer control panel.
To
Specify whether two‑sided (duplex) printing is set as the default for all print jobs.
Notes:
•
"1 sided" is the factory default setting.
• You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or Setup.
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and pop‑up
menus.
Define binding for duplexed pages in relation to page orientation.
Notes:
• Long Edge is the factory default setting. This assumes binding along the long
edge of the page (left edge for portrait and top edge for landscape).
• Short Edge assumes binding along the short edge of the page (top edge for
portrait and left edge for landscape).
Specify the default number of copies for each print job.
Note: 1 is the factory default setting.
Specify whether blank pages are inserted in a print job.
Note: Do Not Print is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: "(1,2,3) (1,2,3)" is the factory default setting.
177