Installing The Driver Locally - Samsung Multifunction Xpress C48 series User Manual

Installing the driver locally

A locally connected machine is a machine directly attached to your computer
using a USB cable. If your machine is attached to a network, skip the following
steps below and go on to installing a network connected machine's driver (see
"Installing driver over the network" on page 147).
• If you are a Mac or Linux operating systems user, refer to the "Installation
for Mac" on page 138 or
• The installation window in this
machine and interface in use.
• Only use a USB cable no longer than 3 meters (118 inches).
14
Windows
1 Make sure that the machine is connected to your computer and
powered on.
Insert the supplied software CD into your CD-ROM drive.
2
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD-
ROM drive and click OK.
• For Windows 8,
"Installation for Linux" on page 140.
User's Guide may differ depending on the
If the installation window does not appear, from Charms, select
Search > Apps and search for Run. Type in X:\Setup.exe, replacing
"X" with the letter that represents your CD-ROM drive and click OK.
If "Tap to choose what happens with this disc." pop-up window
appears, click the window and select Run Setup.exe.
3 Review and accept the installation agreements in the installation
window. Then, click Next.
4 Select USB on the Printer Connection Type screen. Then, click Next.
Follow the instructions in the installation window.
5
You can select the software applications in the Select Software to Install
window.
29
1. Introduction