Samsung Multifunction Xpress C48 series User Manual page 201

System setup
Item
You can set the condition to wake up from power-save
mode.
• On: The machine wake up from the power save mode
on the following cases:
- Pressing any button
Wakeup Event
- Opening or closing the paper tray
- Inserting paper in the document feeder
• Off: The machine wake up from the power save mode
only when the Power/Wake Up button is pressed.
Sets the time that the machine remembers previously
System Timeout used copy settings. After the timeout, the machine
restores the default copy settings.
Sets the length of time the printer waits before printing
Job Timeout the last page of a print job that does not end with a
command to print the page.
Optimize print quality according to the machine's
Altitude Adj.
altitude.
Optimizes print quality according to the humidity in the
Humidity
environment.
Description Item
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
• Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Auto Continue
• After 0 Sec: Even though a paper mismatch occurs,
the machine continues printing.
• After 30 Sec: If a paper mismatch occurs, an error
message will display. The machine waits for about 30
second, then automatically clear the message and
continue printing.
Automatically substitutes the printer driver's paper size
to prevent the paper mismatch between Letter and A4.
Paper Substit. For example, if you have A4 paper in the tray but you set
the paper size to Letter in the printer driver, the machine
prints on A4 paper and vice versa.
Allows you to save print resources and enables eco-
friendly printing.
• Default Mode: Select whether to turn the Eco mode
on or off.
Eco Settings
On force (On-Forced): Sets the Eco mode on with
password. If a user wants to turn the Eco mode
on/off, the user needs to enter the password.
• Select Temp.: Selects the eco template set from the
SyncThru™ Web Service.
Description
201
3. Useful Setting Menus