Dimplex A8M Installation Manual page 27

• For configuration 1, the cables are fed through the holes at the back of the heat pump and directly
inside the electrical box through the base of the heat pump (see figure 11).
• For configuration 2, the cables are fed through the holes at the back of the heat pump, up through the
holes in the base of the heat pump and then from outside the electrical box through the cable glands
(see figure 12).
Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF
M25x1.5 Cable
Gland
Armoured Power
Cable
RS485 Modbus Cable
M25 Lock Nut
Figure 11: Electrical cabling configuration 1
Figure 12: Electrical cabling configuration 2
M16X1.5 Cable
Gland
M16 Lock Nut
27
0844 879 3587
dimplex.co.uk | gdcgroup.co.uk