Installation Instructions - Dimplex A8M Installation Manual

3.

Installation instructions

3.1 Positioning and fixing the heat pump
• The heat pump must be fixed onto a level, stable concrete plinth of minimum dimensions approx.
1000mm x 500mm.
• The concrete plinth must be able to withstand the unit's weight of 110-140kg (depending on
model).
• A minimum distance of 50mm between the heat pump and the edge of the plinth is required on
all sides.
CAUTION: The minimum clearance distances around the heat pump are shown in figure 3; 300mm
at the rear for air flow, 500mm each side for service and at least 1000mm in front of the fan to avoid air
recirculation.
Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF
Figure 6: Required service and air flow clearance dimensions
16
0844 879 3587
dimplex.co.uk | gdcgroup.co.uk