Asus M2N-SLI Hardware User Manual page 148

A new set of navigation keys is displayed on the bottom of the screen.
2. Press <R> to rebuild a RAID array. The following screen appears.
RAID Mode: Mirroring
Striping Width: 1
Adapt
2
1
3. Use the up or down arrow keys to select a RAID array to rebuild, then press
<F7>. The following confirmation message appears.
4. Press <Enter> to start rebuilding array or press <Esc> to cancel.
5. After the rebuild process, the Array list menu appears.
-
Array 1 : NVIDIA MIRROR
- Select Disk Inside Array -
Channel M/S Index
1 Master 0
0 Master 1
[ ↑↓ ] Select [F6] Back
Rebuild array?
[ENTER] OK
XXX.XXG
Striping Block: 64K
Disk Model Name
XXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
[F7] Finish
[ESC] Cancel
Chapter : Software support
Capacity
XXX.XXGB
XXX.XXGB