Boot Settings Configuration - Asus M2N-SLI Hardware User Manual

4.6.5

Boot Settings Configuration

Boot Settings Configuration
Case Open Warning
Quick Boot
Boot Up Floppy Seek
Bootup Num-Lock
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
OS Select For DRAM > 64MB
Full Screen LOGO
Halt On
↑↓ : Select Item
F1:Help
→←: Select Menu
ESC: Exit
Case Open Warning [Enabled]
Enables or disables the chassis open status feature. Setting to Enabled, clears the
chassis open status. Refer to section "2.7.2 Internal connectors" for setting details.
Configuration options: [Disabled] [Enabled]
Quick Boot [Enabled]
Allows you to enable or disable the system quick boot feature. When Enabled,
the system skips certain tests while booting. Configuration options: [Disabled]
[Enabled]
Boot Up Floppy Seek [Disabled]
Enables or disables the floppy seek feature while booting. Setting to Enabled,
clears the chassis open status. Configuration options: [Disabled] [Enabled]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Typematic Rate Setting [Disabled]
Allows you to set the keystroke rate. Enable this item to configure the Typematic
Rate (Chars/Sec) and the Typematic Delay (Msec).
Configuration options: [Disabled] [Enabled]
The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) become
user-configurable only when the item Typematic Rate Setting is enabled.
ASUS M2N-SLI Deluxe
Phoenix-Award BIOS CMOS Setup Utility
Boot
[Enabled]
[Enabled]
[Disabled]
[On]
[Disabled]
6
250
[Non-OS2]
[Enabled]
[All Errors]
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Press [Enter] to
enable or disable.
F5: Setup Defaults
F10: Save and Exit
-