D-Link DWL-3500AP Configuration Manual page 8

• Protocol Keyword: IP
• Source IP Address: 10.90.91.1
• Source IP Mask: 0.0.0.255 (This is a wildcard mask)
• Destination IP Address: 10.90.90.1
• Destination IP Mask: 0.0.0.255
• Destination L4 Port: http
6. Create a new rule, enter 2 as the Rule ID, Permit as the Action, and True for Match
Every, then click Submit. The reason for this second rule is that an ACL has an
implicit "deny all" rule at the end. ACL rules are checked in order and the action of
the first to match the flow is taken. If no match occurs, the packet will be dropped.
Rule 1
Next, you must attach the ACL to port 0/1 and port 0/13 (the physical ports to which the
APs will be connected) so that the rules are applied to the appropriate wireless client
traffic that goes through the APs connected to the switch.
1. From the ACL
2. Select port 0/1 from the Slot/Port drop-down menu.
3. Select IP ACL as the ACL Type.
4. Enter 1 as the sequence number, and click Submit.
5. Repeat the steps to associate ACL 100 with port 0/13.
Interface Configuration page,