Configuring Lan Settings; Configure The Vlans - D-Link DWL-3500AP Configuration Manual

This scenario builds on the configuration from Scenario 2. Although some of the
information configured in Scenario 2 does not apply to Scenario 3, you do not need to
delete any of the pre-existing configurations.
In addition to the VLAN, DHCP, ACL and wireless switch configuration performed in
Scenario 2, the configuration for this scenario involves the following steps:
1. Assign a static IP address to AP2 or use a DHCP server on the customer L3
device or configure DHCP Relay on the L3 customer device to point to a DHCP
Server configured on the WLAN switch.
2. Configure two additional VLANs and VLAN routing interfaces.
3. Configure a default route.
4. Add the IP address of AP2 to the L3 discovery list.
5. Configure and enable the L3 Tunnel network on the wireless switch.
6. Apply the updated profile to the APs.
7. Save the configuration.
The following table shows a summary of the interfaces or devices you configure, along
with their IP address and port information. You configure the entries in bold in this
scenario. All other entries were configured in previous scenarios.
Interface/Device
WS Management Interface
WS Loopback Interface
WS L3 Tunnel Interface
WS Interface to L3 Device
L3 Device Interface to WS
FTP Server
Audio/Video Server
AP1
AP2
Clients on D-LINK-NET1
Clients on D-LINK-NET2
Clients on L-3 Tunnel

2.1. Configuring LAN Settings

All of the features you configure in this section are within the LAN tab on the D-LINK
Wireless Switch.

2.1.1. Configure the VLANs

The summary information for the VLAN configuration is as follows (the bold entries are new for
this scenario, and the grey
VLAN ID
IP Address
10.90.90.90/8
192.168.10.254/24
192.168.250.254/24
172.17.5.253/24
172.17.5.254/24
192.168.250.x/24
192.168.250.x/24
192.168.20.x/24
172.17.6.1/24
192.168.100.x/24
192.168.200.x/24
192.168.250.x/24
entries were configured in Scenario 2):
VLAN Name
Port
Any unused
Logical only
Logical only
0/24
L3 device port
0/21
0/22
0/1
L3 device port
Wireless
Wireless
Wireless
Include Ports IP Address