Ws1 & Ws2 Lan Configuration; Dhcp - D-Link DWL-3500AP Configuration Manual

The following tables show a summary of the interfaces on devices you configure, along
with their IP address and port information as well as the VLANs, DHCP pools, etc. This
configuration starts from scratch and therefore you should clear the configuration on the
WLAN switches from the previous scenarios.
Interface/Device
WS1 Management
Interface
WS1 Loopback Interface
WS1 L3 Tunnel Interface
WS1 L3 Tunnel Interface
WS1 L3 Tunnel Interface
WS1 Interface to L3
Device
L3 Device Interface to
WS1
WS2 Management
Interface
WS2 Loopback Interface
WS2 L3 Tunnel Interface
WS2 L3 Tunnel Interface
WS2 L3 Tunnel Interface
WS2 Interface to L3
Device
L3 Device Interface to
WS2
FTP or other Server on
WS1
RADIUS Server on WS2
AP1 on WS1
AP2 on WS2
Clients on Guest
Clients on D-LINK-NET1 NA
Clients on D-LINK-NET2 NA
WS1 & WS2 LAN Configuration
The configuration in this section takes place on WS1 and WS2, and all features are under
the LAN tab on the navigation panel. Please follow the steps you have learned from
previous scenarios to configure the interfaces, addresses, and VLANs on the systems.

DHCP

Configure DHCP Server parameters and pools on WS1 to provide addresses for AP1,
Guest, Sales, and RD Tunneled WLAN Clients and for AP2 on WS2.
VLAN ID/Name IP Address
NA 10.90.90.90/8
NA 192.168.10.250/24
2 - RD 192.168.2.254/24
3 - Sales 192.168.3.254/24
100 - Guest 192.168.100.254/24 Logical only
10 - Core 172.17.5.253/24
NA 172.17.5.254/24
NA 10.90.90.91/24
NA 192.168.20.254/24
2 - RD 192.168.2.253/24
3 - Sales 192.168.3.253/24
100 - Gues 192.168.100.253/24 Logical only
10 - Core 172.17.6.253/24
NA 172.17.6.254/24
5 - Server 192.168.5.x/24
4 - Server 192.168.4.x/24
101 – AP1 192.168.101.x/24
102 – AP2 192.168.102.x/24
NA 192.168.100.x/24
192.168.2.x/24
192.168.3.x/24
Port
Any unused
Logical only
Logical only
Logical only
0/24
L3 device port
Any unused
Logical only
Logical only
Logical only
0/24
L3 device port
0/13
0/13
0/1
0/1
Wireless
Wireless
Wireless