Pro-Form performance 650 User Manual page 10

6. IMPORTANT: To avoid damaging the
Crossbar (80), do not use power tools and do
not overtighten the #8 x 3/4" Silver Screws
(2).
Orient the Crossbar (80) as shown. Attach the
Crossbar to the Handrails (74, 75) with four
#8 x 3/4" Silver Screws (2) and four 1/4" Star
Washers (8). Start all four Screws, and then
tighten them.
7. With the help of a second person, hold the con-
sole assembly near the Left Upright (78).
Insert the end of the Upright Wire (77) through
the looped plastic tie.
Connect the Upright Wire (77) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
6
2
8
74
7
Console
Wire
Wire
Console
Wire
77
10
80
2
75
Console
Assembly
Plastic Tie
77
Tie
78
8