Remove And Install Mower Deck - Ariens IKON X 42 Operating Instructions Manual

1
1. Upper Jam Nut
2. Lower Jam Nut
Figure 39
REMOVE AND INSTALL MOWER
DECK
Remove Deck
1. Set deck to lowest cutting height.
2. Position supports, such as wood blocks,
under mower deck.
See Figure 40.
3. Remove three self-tapping screws from
left belt cover and remove belt cover.
Retain all parts for reinstallation.
4. Disconnect idler spring from spring
bracket to release belt tension.
5. Remove deck drive belt from rear drive
pulley.
2
3
1. Self-tapping Screws
2. Belt Cover
3. Idler Spring
4. Spring Bracket
6. Remove one hairpin from drag link to
disconnect drag link from mower deck
bracket. Retain all parts for reinstallation.
See Figure 41.
7. Repeat step 6 on other side.
1
1. Mower Deck Bracket
2. Drag Link
3. Hairpin
EN - 28
2
4
Figure 40
3 2
Figure 41
1