Remove And Install Mower Deck - Ariens IKON-X 42 CE Operator's Manual

1. Upper Jam Nut
2. Lower Jam Nut
Figure 38
REMOVE AND INSTALL MOWER
DECK
Remove Deck
1. Set deck to lowest cutting height.
2. Position supports, such as wood blocks,
under mower deck.
See Figure 39.
3. Remove three self-tapping screws from
left belt cover and remove belt cover.
Retain all parts for reinstallation.
4. Disconnect idler spring from spring
bracket to release belt tension.
1
1. Spring
2. Belt Cover
Figure 39
5. Remove deck drive belt from rear drive
2
1
See Figure 41.
6. Remove one hairpin from drag link to
7. Repeat step 6 on other side.
1. Mower Deck Bracket
2
2. Drag Link
3. Hairpin
EN - 27
pulley. See Figure 40.
Figure 40
disconnect drag link from mower deck
bracket. Retain all parts for reinstallation.
2
1
Figure 41
3