Adjustments; Adjust Seat; Adjust Steering Levers - Ariens IKON X 42 Operating Instructions Manual

ADJUSTMENTS

WARNING: AVOID INJURY.
Read and understand the
Safety section before
proceeding.

ADJUST SEAT

See Figure 34.
1. Pull seat adjustment lever up to unlock
seat.
2. Move seat to desired position.
3. Release seat adjustment lever to lock
seat in place.
Figure 34

ADJUST STEERING LEVERS

Adjust Steering Lever Height
See Figure 35.
1. Remove hardware securing steering
lever to upper control arm.
2. Place steering lever in desired adjusting
hole.
• Use upper and middle holes for highest
lever position.
• Use middle and lower holes for lowest
lever position.
3. Reinstall hardware in upper control arm.
4. Align levers side to side. See Adjust
Steering Lever Reach on page 27.
5. Fully tighten hardware.
1
4
1. Adjusting Hole
2. Mounting Hole
3. Steering Lever
4. Upper Control Arm
See Figure 36.
6. Loosen nut on hex bolt supporting
eccentric spacer.
7. Rotate eccentric spacer around hex bolt
until levers are at the same height.
8. Tighten nut.
1
1. Eccentric Spacer
2. Hex Bolt
3. Nut
EN - 26
3
Figure 35
Figure 36
2
3
2