Setting A Proxy Server - Panasonic BB-HNP17A Operating Instructions Manual

Network camera recorder with viewer software ver. 4
Hide thumbs Also See for BB-HNP17A:
Table of Contents

Advertisement

1.5.2 Setting a Proxy Server

To calculate the recording capacity for images with audio, add 4 KB for each second of recording.
345,600 KB plus 4 KB times 3,600 seconds (1 hour) = 360,000 KB (About 352 MB)
*1
Perform calculations with the maximum values of the [MPEG-4 Bit Rate] of the [Video Streaming] set for the camera.
H.264 recording capacity can be calculated by H.264 bit rate
(seconds).
Example: for a 640 x 480 dot resolution with 1,536 Kbps H.264 bit rate, the calculation is 1,536 Kbps divided
by 8 bits, times by 3,600 seconds (1 hour) = 691,200 KB (About 675 MB).
To calculate the recording capacity for images with audio, add 8 KB for each second of recording.
691,200 KB plus 8 KB times 3,600 seconds (1 hour) = 720,000 KB (About 704 MB)
*1
Perform calculations with the maximum values of the [H.264 Bit Rate] of the [Video Streaming] set for the camera.
1.5.2 Setting a Proxy Server
When viewing a camera over the Internet using a proxy server, set [Used] on the [Camera Settings] page for
each camera after setting the proxy server. (® Page 24)
The following settings are not necessary when not using a proxy server.
1.
Click
on the multi-monitoring window.
2.
Click [Proxy Server] under [Preferences].
3.
Set the parameters and click [OK].
Proxy Server page
18
Operating Instructions
(Kbps) divided by 8 bits times by time
*1

Advertisement

Table of Contents
loading

Table of Contents