Table of Contents
Advertisement
2.3.1 About the Application Windows
Note
•
If you double-click a camera's image on the multi-monitoring window, the display will switch to the
single-monitoring window. When you double-click on the single-monitoring window, the display will
return to the multi-monitoring window.
•
When pressing the [Tab] key while pressing [Ctrl] key, the page displays change as follows:
[Multi-Monitoring] ® [Multi-Playback].
Single-Monitoring Window
On the single-monitoring window, a single image from the selected camera is displayed.
1.
Click
on the multi-monitoring window.
•
A single image from the selected camera is displayed.
Note
•
If you double-click a camera's image on the multi-monitoring window, the display will switch to the
single-monitoring window. When you double-click on the single-monitoring window, the display will
return to the multi-monitoring window.
•
If the click-to-center function is active, the display area of a camera image may move when you
double-click the image.
•
The single-monitoring window does not support auto scan pages (® Page 107). Changing to
single-monitoring window while running auto scan on the multi-monitoring window stops auto
58
Operating Instructions
Advertisement
Table of Contents
