Table of Contents
Advertisement
Cameras that have been connected to a power outlet for more than 20 minutes cannot be searched for. If
you want to register a camera by searching, disconnect and then reconnect it to the power outlet.
•
Search Result
Camera names of some models of cameras are not displayed in the camera search list. The first 2 digits
of the model number (WV- or BL-) are also not displayed.
IPv6 Addresses
When cameras are registered with IPv6 addresses, MPEG-4 and H.264 images from the camera may not be
displayed. In this case, check the version of Internet Explorer and update to Internet Explorer 7 or later version.
Preset Sequence Operation Time Limits
Except for some models, there is no limit to the preset sequence operation time.
For 360° network cameras that have image capture mode set to quad PTZ, the preset position is only moved
for the top left screen.
Motion Detection when Operating Pan/Tilt
When [Perform motion detection with this software] is selected for Motion Detection Mode, motion detection
will still be performed even when operating the Pan/Tilt.
MPG/ASF/AVI File Conversion
Resolution after file conversion
When images recorded on widescreen displays are converted to MPG/ASF/AVI files, some of the resolutions
will change.
BB series network cameras
WV series network cameras and some BL
series network cameras
1.3 megapixel
camera 4:3
1.3 megapixel
camera 16:9
3 megapixel camera
16:9
4.1.5 Other Settings
Resolution
Resolution after
before
file conversion
conversion
160 ´ 120
192 ´ 144
800 ´ 600
640 ´ 480
640 ´ 360
640 ´ 480
320 ´ 180
320 ´ 240
1920 ´ 1080
1280 ´ 720
1280 ´ 960
(Maximum 22 fps)
640 ´ 360
640 ´ 480
320 ´ 180
320 ´ 240
Operating Instructions
163
Advertisement
Table of Contents
