Preparation before Operation
Turn off the power switch while the main menu is
1
displayed.
Using the DIP switch, set the mode of the cloud adaptor
2
to the operation mode.
Remove the LAN cable from the cloud adaptor, and
3
connect the other to the network.
Connecting to Cloud Server
Note
• Perform registration for the cloud adaptor on the cloud server screen
beforehand.
Confi rm that the DIP switch is in the
1
operation mode.
2
Turn the power on.
• Make sure at least 30 seconds have passed
after power-off . Then, turn the power on.
When the green LED (LED16) changes from
blinking to lighting,
the set up procedures are complete.
Attach the upper cover to the cloud adaptor. (P.3)
3
Power Switch
OFF
Off
LED
18
Do not change the setting
of switch 1 from the ON
position.
Change the setting of
switch 2 to OFF position.
LAN Cable
Do not change the setting of
switch 1 from the ON position.
Change the setting of Switch 2 to OFF position.
Power Switch
LED
18
ON
Operation mode
2
ON
OFF
1 2 3 4
PC
network
Operation mode
1
ON
OFF
1 2 3 4
LED
LED
LED
Lighting
17
16
15
(Green)
SW7
SW5
Off
Off
Blinking
(Green)
Lighting
(Green)
13