File Location (Snapshots And Web Recording); View Information - Siemens CCMS2010-IRW User Manual

Camera settings

12.3.19 File Location (Snapshots and Web Recording)

12.3.20 View Information

56
Siemens AB
Security Products
The File Location setting can be found under this path: System> File Location.
Users can specify a storage location on the PC or in the hard drive for the snap-
shots and live video recording. The default setting is: C:\. Once confirm the setting,
click on <Save>, and all the snapshots and web recording will be saved in the des-
ignate location.
NOTE: Please make sure the selected file path contains valid characters such as
letters and numbers.
NOTE: For users with Windows 7 operating system, it is required to log on as an
administrator to implement the Snapshot and Web Recording function.
The View Information function can be found under this path: System> View In-
formation.
Click on the category: <View Information>, there will be a drop-down menu with
tabs including <Log File>, <User Information> and <Parameters>.
Log File
The Log File function can be found under this path: System> View Information>
Log File.
Click on the tab to view the system log file. The content of the file provides useful
information about connections after system boot-up.
User Information
The User Information function can be found under this path: System> View In-
formation> User Information.
The administrator can view each added user's login information and privileges (re-
fer to Security).
Get User Information
All the users in the network will be listed in the <User information> zone as shown
below.
User: 4321
It indicates that one user's login username is "User", and the password is "4321".
Get User Privacy
Click on <get user privacy> at the bottom of the page, and the administrator can
view each user's privileges as shown below.
User: 1:1:0:1
1:1:0:1= I/O access : Camera control : Talk : Listen (refer to Security)
Therefore, it denotes the user is granted privileges of I/O access, Camera control
and Listen.
Parameters
The Parameters function can be found under this path: System> View Infor-
mation> Parameter.
05.2014