Storage Management (Local Recording) - Siemens CCMS2010-IRW User Manual

12.3.16 Storage Management (Local Recording)

Siemens AB
Security Products
 Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
The Storage Management setting can be found under this path: System> Storage
Management.
Users can implement local recording to the microSD / SDHC card up to 32GB.
This page shows the capacity information of the microSD card and a recording list
with all the recording files saved on the memory card. Users can also format the
SD card and implement automatic recording cleanup through the setting page.
To implement microSD card recording, please go to the <Recording> page (refer
to Recording) for activation.
NOTE: Please format the microSD / SDHC card when using for the first time. For-
matting will also be required when a memory card already being used on one
camera and later transferred to another camera with different software platform.
Device information
When users insert the microSD / SDHC card, the card information such as the
memory capacity and status will be shown at Device Information section.
For the memory card being successfully installed, its status shall be shown at
<Device information> section in the Storage Management page.
Device setting
Click on the <Format> button to format the memory card.
Disk cleanup setting
Users can enable automatic recordings cleanup by specifying the time and storage
limits.
Recording List
Each video file on the microSD / SDHC card will be listed in the Recording list. The
maximum file size is 60 MB (60 MB per file). When the recording mode is set as
"Always" (consecutive recording) and the microSD / SDHC card recording is also
allowed to be enabled by events triggered. Once events occurred, the system will
immediately implement events recording to the memory card. Then the IP Camera
will return to the regular recording mode after events recording.
 Remove
To remove a file, select the file first, and then click on the <Remove> button.
 Sort
Click on the <Sort> button, and the files in the Recording list will be listed in name
and date order.
NOTE: The capital letter A / M / R / T appears in the very beginning of name de-
notes the sort of the recording: A stands for Alarm; M stands for Motion; R stands
for regular recording, and T stands for Tampering.
 Download
To open / download a video clip, select the file first, and then click on the <down-
load> button below the Recording list field. The selected file window will popup.
Click on the AVI file to directly play the video in the player or download it to a
specified location.
Camera settings
53
05.2014