TP-Link Archer C50 User Manual page 31

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a

value of up to 32 characters. The same name must be assigned to all wireless devices in
your network. The default SSID is set to be TP-LINK_XXXX_5G. This value is
case-sensitive. For example, TEST is NOT the same as test.
Region - Select your region from the drop-down list. This field specifies the region where

the wireless function of the router can be used. It may be illegal to use the wireless
function of the router in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.

Note:
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S.
region only.
Security

 Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the
default PSK password the same as the default PIN code.
 Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption.
The above settings are only for basic wireless parameters. For advanced settings, please
check "More Advanced Wireless Settings", and then you can set the following parameters.
Archer C50
Figure 3-14 Quick Setup – Wireless 5GHz
- 20 -
AC1200 Wireless Dual Band Router