To add a new entry, please follow the steps below.
1.
Click the Add New button.
2.
In Mode field, select IP Address, MAC Address or URL Address.
1) If you select IP Address, the screen shown is Figure 4-82.
I)
In Description field, create a unique description for the target (e.g. Target_1).
II)
In IP Address field, enter the IP address of the target.
III)
Specify the Target Port manually.
2) If you select MAC Address, the screen shown is Figure 4-82.
I)
In Description field, create a unique description for the target (e.g. Target_1).
II)
In IP Address field, enter the IP address of the target.
III)
Specify the Target Port manually.
3) If you select URL Address, the screen shown is Figure 4-84.
Archer C50
Figure 4-82 Add or Modify an Access Target Entry
Figure 4-83 Add or Modify an Access Target Entry
AC1200 Wireless Dual Band Router
- 95 -