TP-Link Archer C50 User Manual page 25

1) If the connection type detected is Dynamic IP, there will appear the MAC Clone page (as
shown in Figure 3-7). In most cases, there is no need to clone the MAC address. You can
select "No, I do NOT need to clone MAC address" and then click Next. If it is necessary
in your case, please select "Yes, I need to clone MAC address" and then click Next.
2) If the connection type detected is Static IP, the next screen will appear as shown in
Figure 3-8. Configure the following parameters and then click Next to continue.
IP Address - This is the WAN IP address as seen by external users on the Internet

(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide

you with the subnet mask which is usually 255.255.255.0.
Default Gateway - Your ISP will provide you with the Gateway address which is the ISP

server's address. Enter the gateway IP address into the box if required.
Primary DNS Server - Enter the DNS Server IP address into the box if required.

Archer C50
Figure 3-7 Quick Setup – MAC Clone
Figure 3-8 Quick Setup - Static IP
- 14 -
AC1200 Wireless Dual Band Router