Table of Contents
Advertisement
Electrical Requirements
Motor Output
Air Pressure
Air Tank
Air Outlet Size
Pressure Gauge
Pump
Overall Dimensions
Line Cord
Thermal Overload Protection
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
failure to follow all instructions listed below may result in
keep work area clean and well lit. Cluttered benches and dark areas invite ac-
1.
cidents.
2.
do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which may
ignite the dust or fumes.
keep bystanders, children, and visitors away while operating a power tool.
3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
for technical questions, please call 1-800-444-3353.
SKU 95370
SPECIfICATIONS
220 V~, 60 Hz, single phase, 13 amps
3.0 HP working, 5.0 HP peak, 3400 RPM
115 PSI (maximum); Pump on: 85 PSI, Pump off: 115 PSI;
8.05 CFM at 40 PSI, 7.10 CFM at 90 PSI
Twin tanks with drain valve; Capacity: 8 gallon
1/4" x 18 NPT, female thread
0~200 PSI, 5.0 PSI increments; 0~14 BAR, 2 increments
Single stage
23-1/2 (H) x 16-1/4 (W) x 48 (L) inches
5' 9" (L), 14 AWG with 3-prong grounded plug
Motor equipped with overheat, auto shut down; reset button
Save This Manual
GENERAL SAfETy RuLES
REAd ANd uNdERSTANd ALL INSTRuCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRuCTIONS
wORk AREA
wARNING!
Page 2
Advertisement
Table of Contents
