Setting Network Parameters - Panasonic KX-HCM10 Operating Instructions Manual

Operating Instructions

Setting Network Parameters

Confirm which type of the Network Configuration you are using as shown in
Section 1.4.1 Selecting the Network Configuration on Page 14 and Page 15.
Please refer to Page 31 for the detail of each parameter.
Direct Connection to PC (without Ethernet hub)—[Type 1]
Check
LAN Connection with Ethernet Switching Hub—[Type 2]
Check
Set to 80. [Default]
Static IP address
and Subnet Mask.
You do not need to
set up.
from 0.1 to
Unlimited Mbit/s.
Set to 80. [Default]
Static IP address
and Subnet Mask.
Default Gateway
address. Please
ask administrator.
DNS server address.
Please ask administrator.
You do not need to
set up.
From 0.1 to
Unlimited Mbit/s.
27