Wan Failover Setting - D-Link DIR-514 User Manual

Section 3 - Configuration
This connection can serve as a backup for your default connection. After modifying any settings, click Save Settings to save your changes.
Failover Type: This option can be set to either Disable, Load Sharing, or Failover.
With Load Sharing, the data usage is distributed evenly over the
two different Internet connections. With Failover, the secondary
Internet connection will be in standby mode until the primary
Internet connection fails.
Remote Host for
This option should be set to an external IP address that can be used to
Keep Alive:
ensure that the 3G/4G LTE connection will be kept from going offline
due to inactivity. An example would be Google's public DNS servers
(8.8.8.8 or 8.8.4.4) or your Internet Service Provider's DNS servers.
Primary WAN:
This will automatically be set to your currently selected Internet
connection type.
Secondary WAN: This can be set by clicking on Add New Rule...; the available options
will be shown in the drop-down menu.
D-Link DIR-514 User Manual

WAN Failover Setting

17