Tools; Admin - D-Link DIR-514 User Manual

Section 3 - Configuration
The TOOLS pages allow you to adjust various system setting for your router, such as
the system time, firmware, and custom schedules. To view the Tools pages, click on
TOOLS at the top of the screen.
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access while users
only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying any settings, click
Save Settings to save your changes.

Admin

Enter and confirm the password that the admin account
Password:
will use to access the router's management interface.
Enable Remote
Check this box to enable remote management. Remote
Management:
management allows the DIR-514 to be configured over the
Internet through a web browser. A username and password will
still be required to access the Web-Management interface.
IP Allowed to
Enter the Internet IP address of the PC that has access to the
Access:
router. If you enter an asterisk (*) in this field, then anyone will
be able to access the Router. Adding an asterisk (*) into this
field could present a security risk and is not recommended.
Port:
This is the port number used to access the router. 8080 is the port
usually used for the Web-Management interface.
D-Link DIR-514 User Manual

Tools

Admin
46