D-Link DIR-514 User Manual page 27

Section 3 - Configuration
If you choose WEP, the following options will appear:
WEP Encryption: Select whether to use 64-bit or 128-bit encryption.
Authentication:
Select whether to use Open or Shared authentication.
WEP Key:
Set the WEP key/password for your wireless network. Based on
whether you are using 64 or 128-bit encryption, and whether you
are using a HEX or ASCII key, you will need to enter different numbers
of characters for your key, as indicated below the WEP Key text box.
ASCII keys may use letters and numbers only, and HEX keys may use
numbers 0-9 and letters A-F only.
If you choose WPA-Personal, the following options will appear:
WPA Mode: Select whether to use WPA2 only or WPA only. WPA2 only is the
most secure, provided that all of your clients can support it.
Cipher Type: Select whether to use the TKIP or AES cipher. The AES cipher is the
most secure, provided that all of your clients can support it.
Group Key
Enter the amount of time in seconds before the group key used for
Update Interval:
broadcast and multicast data is changed.
Network Key:
Enter the key/password you want to use for your wireless network.
The key must be 8 to 63 characters long, and may only contain letters
and numbers.
D-Link DIR-514 User Manual 23