Settings / Wan Failover - D-Link DIR-825 User Manual
Ac1200 wave 2 mu-mimo wi-fi easymesh gigabit router with 3g/lte support and usb port
Hide thumbs
Also See for DIR-825:
- User manual (249 pages) ,
- Quick installation manual (61 pages) ,
- Configuring (20 pages)
Table of Contents
Advertisement
DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Gigabit Router with 3G/LTE Support and USB Port
User Manual
Settings / WAN Failover
On the Settings / WAN Failover page, you can enable the WAN backup function, which provides
you with uninterrupted access to the Internet. When your main connection breaks down, the router
activates the backup connection; and when the main channel is recovered, the router switches to it
and disconnects the reserve one.
To activate the backup function, create several WAN connections. After that go to the Settings /
WAN Failover page, move the Enable switch to the right.
In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their
priority. The first connection on the list serves as the main connection, the others are backup
connections.
To change the priority of a connection, left-click the relevant line in the table.
Figure 90. The Settings / WAN Failover page.
Page 111 of 244
Configuring via Web-based Interface
Advertisement
Table of Contents
