Wan Setting - D-Link DWR-961 User Manual

Section 3 - Configuration
This page allows you to configure the settings for the WAN/LAN interface on the rear panel of the device.
Internet Settings
WAN Mode Select this to use the WAN/LAN interface as a WAN port. If this
is enabled, the router will use a WAN Ethernet connection as a
backup connection.
LAN Mode Select this to use the WAN/LAN interface as a LAN port. If this is
selected, the router will only connect to the Internet using its LTE
connection.
WAN Settings
WAN
Select the type of WAN connection to use. The subsequent fields
Connection
will change depending on which type you select.
Type
D-Link DWR-961 User Manual

WAN Setting

13