Table of Contents
Advertisement
2. Load Partition
Use this function when you want to add a new master
disc partition to your hard drive.
After pressing ENT when the display reads 2. Load Partition, you will be asked to verify
that you want to load a partition. Press ENT to continue loading.
Enter in the partition name of up to 14 characters, using the ▼▲ buttons to change the
first character. Press ENT when the character you want is in the cursor position. To
leave a position blank, press ENT when the space is empty.
After entering in all 14 characters, press ENT to highlight OK on the display. If the
name is correct, press ENT. If you need to make changes, press the ESC button until
the cursor is on the character that needs to be changed.
You will be asked to verify the name one last time before the master inserted in the
reader drive is copied to the hard drive. The copy progress will be sown on the display.
Once the master disc is copied to the hard drive, the reader drive will be ejected.
The master under the partition name you entered will now be available for duplication
from the hard drive.
3. Rename Partition
The Rename Partition function allows you to change the name of an existing partition
on the hard drive.
Use the ▼▲ buttons to move through the list of partitions until you get to the partition
you want to rename. Press ENT, then use the ▼, ▲, and ENT buttons as in the Load
Partition function to change the name. Press the ENT button when the cursor is on OK
to save the new partition name.
4. Delete Partition
Use the Delete Partition function to remove a master partition that is no longer in use or
if you need to clear hard drive space for new partitions to be added. Use the ▼▲
buttons to select the partition to delete, then press ENT. You will be asked to confirm
deletion of the selected partition; press ENT if you are sure you want to remove the
partition from the hard drive.
The Delete Partition function cannot be undone.
5. Partition Info
Use the ▼▲ buttons to scroll through the loaded partitions. The type of master used,
size of the data in the partition, and the name will be displayed.
6. Select Loading Drive
By default, the drive selected as the source will be used for transferring a master from
disc to hard drive, but you can use this function to select a different source drive. Use
the ▼▲ buttons to scroll through the available drives to find the drive you want to use.
Press ENT to select the displayed drive.
This will not change the Source Drive in the Main Menu; it will only be used as the
source for loading discs to the hard drive.
7. Format Hard Drive
The Format Hard Drive function will clear all contents from the hard drive. If you want
to delete all partitions from the hard drive, this function is a quicker method than using
the Delete Partition function on each individual partition.
The Format Hard Drive function cannot be undone.
Mix Audio Tracks
If you have a DVD Premium or the External connection is On, the display will show this menu
item as 9, not 10.
You can use the Mix Audio Tracks feature to combine specific
tracks from multiple audio CD masters onto a single disc. Insert
your first master disc and one blank CD, then press ENT when
the display shows Mix Audio Tracks.
The DVD Premium Pro Series Duplicator will give you the option of sending the tracks to the hard
drive or burning directly from CD. Regardless of the method, the track selection process will be
the same.
DVD Premium & Premium Pro Series
Load Partition[231GB]
Load- New Partition
Microboards B.30
10. Mix Audio Tracks
13
Advertisement
Table of Contents
