If any of these items are missing, please contact or Microboards Technology Technical Support at 952-556-1639. IMPORTANT: Please keep all the packing for your DVD Premium Pro Series duplicator. If your unit ever needs to be sent in for service, it must be returned in the original packing or the warranty will be voided.
Installation Requirements System Setup • Connect the power cable to the DVD Premium Pro Series tower and plug in to a protected power outlet strip or UPS power supply. • Connect the 2 towers using the NET cable provided (see page 7 for more information).
Connecting Master and Slave Towers The Microboards DVD Premium Pro NET tower line requires a physical connection between the towers. A tower will be designated as a Master or as a Slave tower initially based solely on the configuration of the connection.
Microboards NET Configuration The Microboards NET configuration allows you to connect multiple 10-drive tower duplicators. They can function together as a single duplicator with 10 drives per tower for ultra high-quantity production, or can operate independently as stand-alone duplicators, each copying from a different master.
Advanced Configuration If, however, you wish to operate them as two 3-tower Master/Slave groups, simply press the YES button on the tower on which the Configuration Options display reads NET SLAVE 3. This will cause all towers following this tower to be slaved to that tower. The YES button on the first tower must also be pressed to slave towers 2 and 3 to the first tower.
Main Menu The Arrow buttons (▼▲)allow you to move forward or backward in the menu without selecting the current menu item. The NO button will move you to the next menu item. YES will select the current menu item. INSERT COPY START? (DISCtoDISC) MASTER DISC...
Copy Disc to Disc 1. Place the Master Disc into the Reader drive. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same media type as the master;...
11. Once the Master disc has been copied to the HDD, the Reader drive will eject the disc. When you go back into the MASTER SELECT? Menu, and select a partition with data stored on it, the display will show the type of data (ROM or Video) and the capacity of that data.
7. Press the YES button if you are sure you want to clear the HDD. 8. The hard drive will now be cleared and you will be asked if you want to register another master to the HDD. >HDD1? (DISC to HDD) 9.
Press YES to finish extraction and register selected tracks in HDD. Press NO or ▼ to add more tracks from this master data. 6. If you press YES in step 5, the DVD Premium Pro Series asks you to register the extracted tracks in HDD.
Press YES to extract more tracks from other master audio discs. Press NO to complete extraction. 8. If you press NO, the DVD Premium Pro Series moves back to COPY menu so that you can copy the extracted tracks in HDD to blank CD-R media.
Shows DVD Premium Pro Series firmware version and H/W information. F/W Update Used when updating the firmware of the DVD Premium Pro Series duplicator. NET Reboot Will reboot the Master tower and any towers Slaved to the Master when running using the NET option.
Error Codes Read Errors ASCQ Description NO ADDITIONAL SENSE INFORMATION I/O PROCESS TERMINATED, PLAY OPERATION ABORTED AUDIO PLAY OPERATION IN PROGRESS AUDIO PLAY OPERATION PAUSE AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED AUDIO PLAY OPERATION STOPPED DUE TO ERROR NO CURRENT AUDIO STATUS TO RETURN CLEANINF REQUESTED NO INDEX/SECTOR SIGNAL NO SEEK COMPLETE...
Page 19
PARAMETERS CHANGED MODE PARAMETERS CHANGED LOG PARAMETERS CHANGED RESERVATIONS PREEMPTED COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT COMMAND SEQUENCE ERROR PERSISTENT PREVENT CONFLICT COMMANDS CLEARED BY ANOTHER INITIATOR INCOMPATIBLE MEDIUM INSTALLED CANNOT READ MEDIUM - UNKNOWN FORMAT CANNOT READ MEDIUM – INCOMPATIBLE FORMAT CLEASNING CARTRIDGE INSTALLED ENCLOSURE SERVICES FAILURE UNSUPPORTED ENCLOSURE FUNCTION...
Page 20
AUDIO PLAY OPERATION PAUSED AUDIO PLAY OPERATION SUCCESSFULLY AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR NO CURRENT AUDIO STATUS TO RETURN NO SEEK COMPLETE LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE LOGICAL UNIT IS IN PROCESS OF BECOMING READY LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED LOGICAL UNIT NOT READY, FORMAT IN PROGRESS LOGICAL UNIT NOT READY, OPERATION IN PROGRESS...
Page 21
THRESHOLD PARAMETERS NOT SUPPORTED INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION WRITE PROTECTED HARDWARE WRITE PROTECTED LOGICAL UNIT SOFTWARE WRITE PROTECTED ASSOCIATED WRITE PROTECT PERSISTENT WRITE PROTECT PERSISTENT WRITE PROTECT CONDITIONAL WRITE PROTECT NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED POWER ON, RESET, OR BUS DEVICE RESET OCCURRED POWER ON OCCURRED SCSI BUS RESET OCCURRED...
Applicable media Firmware Updates Occasionally it may be necessary to load updated firmware on to the DVD Premium Pro Series duplicator. Only those firmware versions recommended and provided by Microboards Technical Support for this specific product should be installed. Installation of an incorrect firmware on any Microboards Technology product may result in any remaining warranty being voided.
Technical Support For technical questions or support issues, contact Microboards Technology technical support: United States PH: 952-556-1639 FAX: 952-556-1628 support@microboards.com www.microboards.com Please have the Model and Serial Number of your duplicator available when contacting Technical Support. Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s authority to operate this equipment.