MicroBoards Technology DVD Premium Series User Manual page 26

Microboards Technology, LLC
Error
Error Message
Code
Over Blank Disc
253
Capacity
260 No Update File
261 Wrong Update File
262 Unknown Flash Model
263 User Abort
Description and Recommended Solutions
Applies to Mix Audio Tracks.
selected tracks is larger than the remaining capacity of
the target discs.
Select alternate track of smaller size, or remove
selected track.
A valid firmware file was not detected on the disc during a
Firmware Update attempt.
1. Confirm the file on the disc is not a "zip" file. If
so, extract the file and burn to another disc.
2. Confirm that the update disc was burned as a
"Mode 1" Data CD. Drag-and-drop burn methods
such as the Windows XP burn utility generally do
not use this format and will not be recognized as
valid.
3. Verify that there are no other discs loaded into
the duplicator. Insert the update disc in another
drive tray and repeat.
The Firmware Update File is either not compatible with
your duplicator or is corrupted.
Download and burn Update File again. Contact Tech
Support if this error persists.
The Firmware Update File is not intended for your
duplicator.
Contact Tech Support for the correct file.
Duplicator Model and Serial Number available.
A duplication job has been deliberately cancelled by the
user by pressing the ESC button for more than 5 seconds
during a duplication attempt.
Once the reason for cancellation has been corrected,
restart the job after replacing any partially burned
media.
26
The total size of the
Have