Installation Requirements; Tools And Parts - Maytag W10353871A Installation Instructions Manual

Tools and Parts

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
■ Pliers (that open to
1 9 / " [39.5 mm])
16
Tools needed for installation
■ Open end wrenches 1/2" and 9/16"
■
Torx ®† T-20 Security screwdriver
■ 1/4" nut driver
Parts supplied
A
D E
A. U-shaped hose form
B. Water inlet hoses (2)
C. Inlet hose washers (4)
†
® TORX is a registered trademark of Saturn Fasteners, Inc.

INSTALLATION REQUIREMENTS

■ Flashlight (optional)
■ Level
■
Wood block
■ Ruler or
measuring tape
B
C
F
G
D. Transit bolt hole plug (4)
E. Beaded tie strap
F. Drain hose
G. Hose clamp
Parts supplied for PD Models:
Service door lock cam
Parts supplied for PR Models:
Card reader bezel
Foam pads
Screws (2)
3