Disassembly For Repair; Precautions For Disassembly - Kenwood TM-V71A Service Manual

TM-V71A/V71E
Document Copyrights
Copyright 2007 by Kenwood Corporation. All rights
reserved.
No part of this manual may be reproduced, translated,
distributed, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or
otherwise, for any purpose without the prior written
permission of Kenwood.

Precautions for Disassembly

When removing the rear case from the panel, open the
bottom side slowly so as not to stress the FPC, as the FPC
on the rear case is connected with the connector of the
display PCB.
2

DISASSEMBLY FOR REPAIR

Display PCB
FPC
Disclaimer
While every precaution has been taken in the preparation
of this manual, Kenwood assumes no responsibility for
errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained
herein. Kenwood reserves the right to make changes to any
products herein at any time for improvement purposes.
Panel
Rear case