Auger Mark - Fuji Xerox DocuPrint CM215 Series User Manual

Auger Mark

Problem
The printed result has auger
mark.
NOTE:
• If the problem continues even though you have taken suggested actions described above, contact the Fuji
Xerox local representative office or an authorised dealer.
378 Troubleshooting
Action
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner in each
1 Check the toner level in the Consumables tab in the Printer
Status window of the SimpleMonitor.
2 Replace the toner cartridges
Start Clean Developer.
1 Launch the Printer Setting
the Diagnosis tab.
2 Click the Start button.
toner cartridge.
as necessary.
Utility, and click Clean Developer on