Key Server Status - Fujitsu Eternus DX100 S3 User Manual

Appendix E Status List
E.8 Key Server Status
Unregistered Server Certificate
Expired Server Certificate
No SSL Certificate
*1: "Self-signed SSL certificate" or "SSL server certificate"
E.8

Key Server Status

The meaning of each key server status is described below.
Normal
Setting
Network Error
Key Acquisition Failure
Key Server Error
Internal Error
*1: "Self-signed SSL certificate" or "SSL server certificate"
Status
The "SSL / KMIP Certificate" (key server certification) is not registered in the
ETERNUS DX. Communication between the ETERNUS DX and the key server
cannot be performed.
The "SSL / KMIP Certificate" (key server certification) has expired. Communication
between the ETERNUS DX and the key server cannot be performed.
An SSL certificate (*1) for the ETERNUS DX has not been created. Communication
between the ETERNUS DX and the key server cannot be performed.
Status
The communication between the ETERNUS DX and the key server is normal. The
key can be obtained successfully. The key server is in normal state.
"Setting" indicates the following conditions:
•
The "SSL / KMIP Certificate" (key server certification) or SSL certificate (*1) is
not registered.
•
The network between the ETERNUS DX and the key server is normal, but
connection to the key server is forbidden.
The network between the ETERNUS DX and the key server is not connected
normally.
The key that is requested from the ETERNUS DX does not exist in the key server.
An error due to a failure other than key acquisition failure is detected.
Communication to the key server could not be performed due to an internal
failure of the ETERNUS DX.
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
Description
Description
936
P2X0-1210-05ENZ0