Chapter 5 System Settings and Display
5.2 Network Management > show snmp-user
show snmp-user
This command displays a list of the registered SNMP users.
■
Syntax
show snmp-user [-name
■
Parameter
-user
or
-number
■
Output
No.
User name
Authentication
Encryption
MIB-view
■
Example(s)
The following example displays a list of all the registered SNMP users:
CLI> show snmp-user
No.
User name
1
"FooVar1"
2
"FooVax"
3
"BUZZ"
4
"snmpuser1"
5
"snmpuser2"
user_name
| -number
Optional. This parameter specifies the user name or user number to display SNMP user entry.
When using "-number", one or more users can be specified by separating them with a comma
(,) or a hyphen (-). If this parameter is omitted, all the registered SNMP users are listed.
Example:
-name Foo
-number 1
-number 2,3
-number 1-4
user_name
SNMP user name
numbers
SNMP user number
User number
User name
Authentication method or disable
Encryption enable or disable (AES, DES, or disable)
MIB view name
ETERNUS CLI User's Guide
Copyright 2014 FUJITSU LIMITED
numbers
]
Authentication
Encryption
MD5
AES
SHA
disable
disable
disable
MD5
DES
SHA
DES
523
MIB-view
"xview4"
"xview5"
"view13"
"View-exmib"
P2X0-1210-05ENZ0