Incoming Call Queue Monitor - Panasonic KX-TDA100 Features Manual

Log-in / Log-out
Specifies the feature number used for joining or leaving the incoming call distribution group.
Default
*736
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]
Feature Guide References
1.2.2.6 Log-in/Log-out
2.3.5 Flexible Numbering/Fixed Numbering

Incoming Call Queue Monitor

Specifies the feature number, available only for the extension assigned as a supervisor, used for monitoring
the status of an incoming call distribution group with the display.
Default
*739
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
4.9.6 Incoming Call Distribution Group—Group Settings [3-5-1]—Miscellaneous—Supervisor Extension
Number
Feature Guide References
1.2.2.7 Supervisory Feature
2.3.5 Flexible Numbering/Fixed Numbering
Hot Line (Pickup Dial) Program / Set / Cancel
Specifies the feature number used for setting/canceling, or programming a number for Hot Line.
Default
*740
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming Guide References
4.8.5 Timers & Counters—CO / Extension [2-4-1]—Hot Line (Pickup Dial) Start Timer
4.8 System [2]
Feature Guide 489