Panasonic KX-TDA100 Features Manual page 377

Feature Guide References
None
Pulse Dial—CO Feed Back Tone
Specifies whether to turn on or turn off the pulse feedback tone. For outgoing CO line calls, the dialed
number is toned out, which informs the extension user that the dialed number has been dialed out.
Default
Yes
Value Range
No, Yes
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse Dial—Maximum BREAK Width
Specifies the maximum length of the break signal in a pulse dial.
Default
112 ms
Value Range
8 × n (n=9–20) ms
Programming Guide References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse Dial—Minimum MAKE Width
Specifies the maximum length of the make signal in a pulse dial.
Default
8 ms
Value Range
8 × n (n=1–5) ms
Programming Guide References
4.7.1 Slot [1-1]
4.7 Configuration [1]
Feature Guide 377