1.26 Audible Tone Features
1.26.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Type
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
Tone 4-2
Tone 5
Conditions
•
Confirmation Tone Patterns
All confirmation tone patterns have a default (→ 5.2.1 Tones/Ring Tones).
•
It is possible to eliminate each tone.
190
Feature Guide
a)
Sent when the setting is accepted.
b)
Sent when a call is received in voice-calling mode (Alternate
Receiving—Ring/Voice). The caller's voice will be heard after the tone.
a)
Sent from an external paging device or an extension before being
paged.
b)
Sent when a call is received while an extension is in Hands-free
Answerback mode.
a)
Sent before a conversation is established using the Paging feature.
b)
Sent to the caller when a conversation is established with an extension
in one of the following modes:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/Voice)
Sent before a conversation is established when accessing the following
features by their feature numbers:
•
Call Park Retrieve
•
Call Pickup
•
Hold Retrieve
•
Paging Answer
•
Trunk Answer From Any Station (TAFAS)
Sent when a call changes from a two-party call to a three-party call. (For
example, Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Sent when a call changes from a three-party call to a two-party call. (For
example, Executive Busy Override, Conference, Privacy Release, Two-way
Record.)
Sent when a call is placed on hold (including a consultation hold).
Description