Table of Contents
Advertisement
Do not connect the tumble dryer to the mains electricity supply by
an extension lead. Extension leads are a fire hazard and do not guar-
antee the required safety of the tumble dryer.
If the electrical connection cable is faulty it must always be re-
placed by a Miele authorised service technician to protect the user
from danger.
The electrical safety of this tumble dryer can only be guaranteed
when correctly earthed. It is essential that this standard safety re-
quirement is met. If in any doubt, please have the on-site wiring sys-
tem inspected by a qualified electrician. Miele cannot be held liable
for the consequences of an inadequate earthing system (e.g. electric
shock).
Unauthorised repairs could result in unforeseen dangers for the
user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the warranty. Ensure cur-
rent is not supplied to the tumble dryer until after maintenance or re-
pair work has been carried out.
Faulty components must only be replaced by genuine Miele ori-
ginal spare parts. The manufacturer can only guarantee the safety of
the appliance when Miele replacement parts are used.
To ensure the correct performance of the tumble dryer and to pre-
vent the risk of faults and fire, it is important to carry out mainten-
ance on a regular basis.
In the event of a fault or for cleaning purposes, the tumble dryer is
only completely isolated from the electricity supply when:
- it is switched off at the wall socket or the plug is withdrawn, or
- it is switched off at the mains, or the mains fuse is disconnected
- the screw-out fuse is removed (in countries where this is applic-
able), or it is switched off at the isolator switch.
See "Installation - Electrical connection".
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Warning and Safety instructions
9
Advertisement
Table of Contents
