Table of Contents
Advertisement
Fire hazard.
This tumble dryer must not be connected to a controllable socket
(e.g. a timer or a peak-load switch-off device).
The tumble dryer may only be operated with a peak-load device if this
is connected to the tumble dryer via the Miele XCI box and the relev-
ant settings have been configured on the tumble dryer.
There is a risk of the laundry igniting itself if the drying programme is
cancelled before the cooling phase has finished.
To prevent the risk of fire, the following textiles must not be dried
in this tumble dryer:
- items which have been cleaned using chemicals (e.g. professional
dry-cleaning agents).
- fabrics which contain a large proportion of rubber, foam rubber or
rubber-like materials. For example, products made from latex foam
rubber, shower caps, waterproof textiles, rubberised articles and
items of clothing and pillows with foam rubber filling.
- Fabrics which contain damaged padding or fillings (e.g. pillows,
jackets). When damaged, the filling can get out with the risk of it
igniting in the dryer.
The programme ends when the cooling phase starts. Many pro-
grammes are followed by the cooling phase to ensure that the items
are not too hot to handle when you remove them (this also reduces
the risk of the laundry self-igniting).
Always remove all laundry as soon as the programme has finished.
Fabric conditioner and similar products must be used according to
the instructions on the manufacturer's packaging.
Benzine, petrol, paraffin, or any easily flammable liquid must not
be stored or used near the machine. Danger of explosion.
Warning and Safety instructions
15
Advertisement
Table of Contents
