Table of Contents
Advertisement
Fault alarm
The audible signal that indicates an er-
ror can be switched off.
- Factory default: On
- Off
Anti-crease
At the end of the programme, the
drum will continue to rotate at inter-
vals if the laundry is not removed im-
mediately.
Changing this setting leads to increased
energy consumption.
The setting can be switched off or a
time between 1 and 12 hours can be se-
lected.
Factory default: Off
Supervisor level
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
- Factory default: Off
- On
Cooling down temperature
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all programmes. This
means that the cooling phase is exten-
ded.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
40 °C–55 °C.
Factory default: 55 °C
83
Advertisement
Table of Contents
