Dss/Blf Appearances - Panasonic DBS 824 Manual

Line Appearances

DSS/BLF Appearances

(CPC-S and CPC-M)
Description
When a DSS/BLF key is programmed, it automatically provides direct station
selection and busy lamp field for the assigned extension number If desired,
the DSS/BLF key can also provide ring monitor
For example, you can set extension A as a DSVBLF key on extension B
When extension A rings, the LED of the DSVBLF key on extension B
flashes If extension B answers the call by pressing the DSS/BLF key, the
LED on extension A goes off and the call remains only on the DSS/BLF key
of extension B
Ringing can be set on either one or both extensions If the extensions are not
set for ringing, the LED of the DSS/BLF key will flash red If the extensions
are set for ringing, the LED will flash green
When extension A is in use, the LED of the DSS/BLF key on extension B will
light red If one extension has the Absence Message, Call Forwarding, or Do-
Not-Disturb feature activated, the DSS/BLF key will light green
Operation
To assign a DSWBLF key
1
2
3
4
5
6
To make an intercom call using the DSS/BLF key
Press the idle DSS/BLF key
3-48
ON/OFF
Press the key
Press the PROG
key
Press the FF key to be assigned the DSWBLF appearance
Dial the extension number
HOLD
Press key
Press the ON/OFF
key
DBS 824-l O-700
Key Telephone Features
issued 3/l /95