Panasonic DBS 824 Manual page 407

Country Code Table
Country Code Table
Software Version CPC-S and CPC-M, Version 1 0 and higher
Address FR I# 19# (Table)# (Code)#
Description
This address applies only to systems programmed to use the new NANP
dialing plan (FF7 I# 16#) It also applies only to TRS types 3-6 (TRS types
O-2 do not allow international dialing TRS type 7 allows all dialing)
In this address, the DBS 824 system provides a Country Code Table of up to
10 allowable country codes for placing international calls Each defined
country code can be 1 to 3 digits long, and can include wild-card characters
When a phone user accesses a trunk assigned TRS type 3-6 and then dials 01
or 0 11, the system first checks the international calling restriction (if any)
assigned to that extension (in FF7 l# 18#) The DBS 824 then checks the
system-wide international calling restriction (in FF7 l# l#) to see if
international calling is allowed, or if the Country Code Table should be
checked first If so, and if the country code is included in the table, the call is
allowed If the country code is not included in the table, the user will hear a
busy tone and "Restricted" will be displayed on the phone
Programming
Related Programming
Dialing Plan Switch
International Calling on Extensions FF7 l# 18# (ExtPort)# (0 or l)##
International Calling For TRS Types 3-6
Notes
Short Country Codes When country codes of less than 3 digits are entered,
the system will allow any country code that begins with that number or
numbers For example, an entry of "9" allows all two- and three-digit country
codes beginning with "9 " Likewise, an entry of "26" allows all three-digit
country codes beginning with "26 "
Digit Restiction The system will not accept country codes that begin with
7-l 4
FF7 1# 19# (l;O)# (0$9)#
Table Entry
FF7 l# 16# (0 or l)#
DBS 824-l O-400
Country Code Entry
FF7
Issued 3/l /95