How To Enter The Programming Mode - Panasonic DBS 824 Manual

Understanding FF Key Programming
Phone keys used in programming mode
Figure 2
COWF Resets entry
to default setting
Stores your entry and
moves backward (decrements
program address number)

How to Enter the Programming Mode

From the Attendant Port
Programming can be performed from the attendant display phone A phone
that is connected to extension port 1 with an extension number of 100 is
automatically an attendant phone By default, extension port 2 (extension
number 101) is the second attendant phone, although this extension can be
reprogrammed Up to two other phones (four total) can also be programmed
to be the third and fourth attendant phone Programming is also possible from
other extensions (see 'From a Non-Attendant Port" on page Intro-7)
To enter the programming mode from the attendant phone
1 Press ON/OFF
2 Press
Intro-6
programming level
FLASH
backward (decrements port number in
the same address, or decrements program
address number)
HOLD
forward (increments port number in
the same address, or increments program
address number)
#
moves forward (increments
program address number)
PROG
DBS 824-l O-400
Introduction to DBS 824 Programming
Moves backward to the previous
Stores your entry and moves
Stores your entry and moves
Stores your entry and
Issued 3/l /95