Panasonic DBS 824 Manual page 342

FF3
Auto Set Relocation Code
Software VersiBn CPC-S and CPC-M, Version 1 0 and higher
Address FF3 (ExtPort)# 40# (OOOl-9999)#
Description
You can relocate (or swap) the program settings of one phone to another The
Auto Set Relocation Code enables you to perform the relocation
For example, if the phone of extension 102 is unplugged and moved to an
office with a wall jack (port) assigned to extension 103, this feature can be
used to relocate 102's programming to 103 In order to move the
programming, an Auto Set Relocation Code must be assigned for extension
103
Programming
To assign an Auto Set Relocation Code
To clear an Auto Set Relocation Code
Moving An Extension
Notes
program settings from extension 102 to extension 103
issued 3/l 195
FF3 (1-16
Extension Port
(Destination)
CPC-S 1-16
CPC-M l-24
FF3 (l-16 or l-24)# 40## CONF ON/OFF
The following procedure explains how to move the
1 At extension 102, pick up the handset.
2
Press "#lo "
3 Dial extension number 103
4 Enter the four-digit Auto Set Relocation Code assigned to
extension 103
DBS 824-l O-400
Auto Set Relocation Code
or
Auto Set Relocation Code
(0001-9999)
3-45