Yamaha YZ250 2022 Owner's Service Manual page 63

1. Protector
2. Rear brake caliper
3. Bleed screw
4. Gasket
5. Rear brake hose
6. Brake pedal
7. Rear brake master cylinder assembly
8. Spring
9. Frame
A. Install the spring as shown in the illustration.
B. Pass the rear brake hose into the rear brake
hose holders.
C. Route the rear brake hose so that it is not
bent as shown by the double-dash line.
D. Route the rear brake hose and spring so that
they do not interfere with each other.
E. Make sure that the rear brake hose is not
excessively twisted.
F. Make sure that the metal part of the rear
brake hose contacts the stopper of the rear
brake master cylinder.
G. Install the rear brake hose so that the bended
portion of the metal part of the rear brake
hose faces as shown in the illustration.
CABLE ROUTING DIAGRAM
2-24