Yamaha YZF R1 2020 Owner's Manual page 49

6. Select "IND Stop", and then rotate
the wheel switch to adjust the
r/min at which the shift timing indi-
cator will go off. "IND Stop" oper-
ational range is 8500–15000 r/min.
TIP
The blue area on the tachometer indi-
cates the currently set operational
range of the shift indicator light.
"Shift IND Brightness"
The shift timing indicator light has six
brightness levels.
Shift Indicator
MPH
Shift IND Setting
Shift IND Brightness
Tach IND Setting
Peak Rev IND Setting
Select "Shift IND Brightness", then use
the wheel switch to adjust the setting.
Short push the wheel switch to confirm
the setting and exit.
MPH
Shift IND Brightness
"Tach IND Setting"
This module allows you to turn the ta-
chometer color display on or off. When
turned off, the tachometer will display
all r/min levels below the red zone in
10 : 00
GP GPS
black or white (depending on wallpa-
per settings). When turned on, the mid
and mid-to-high r/min zones can be
set to come on in green and then or-
ange colors.
1. Select "Tach IND Setting".
Instrument and control functions
10 : 00
Shift Indicator GPS
3
5-25
Shift Indicator
MPH
Shift IND Setting
Shift IND Brightness
Tach IND Setting
Peak Rev IND Setting
2. Select "IND Mode".
Shift Indicator
MPH
1000 r/min
Tach IND Setting
IND Mode
Tach IND 1st 8000
11000
Tach IND 2nd
3. Select ON to turn the tachometer
color display mode on (or select
OFF to turn this function off).
10 : 00
GP GPS
5
10 : 00
GPS
ON
r/min
r/min